You are here: Home » News » mid-term inspection » Three Product Inspection Types You Didn't Know

Three Product Inspection Types You Didn't Know

Views: 201     Author: Wendy     Publish Time: 2023-04-27      Origin: Site Inquire

Three Product Inspection Types You Didn't Know

The steps involved in product inspection are well understood by customers. But when to check things is a factor that customers rarely think about. Few buyers are aware of the impact that manufacturing inspection type might have on the final product. You will discover the three typical sorts of product inspections, as well as how often and why they are conducted, in this article.

Product Inspection Type 1: Pre-production

Before manufacturing commences, raw materials and components are inspected during pre-production inspection. Many purchasers who have reservations about the quality of the raw materials want to examine at this point before manufacturing. Before mass manufacturing, early examination here enables the customer to avoid quality problems later on.

Jewelry is an example of a product where pre-production inspection may be required. Jewelry's selling price is heavily influenced by the quality of the stones and gems used, such as valuable stones and jewels. To assure the quality of the final product, a product inspection performed before jewelry pieces are combined is frequently required. At this point, composition testing will also probably be done.

Product Inspection Type 2: During Production

When 20 to 60 percent of manufacturing has been finished, a "DUPRO" inspection is conducted. At this midpoint in the manufacturing process, inspection gives the opportunity to verify the products being produced as well as workflow and material usage. Products that include several separate processes, huge volume shipments, and products that are susceptible to flaws that can't be fixed at a later stage of manufacturing might all benefit from this form of product inspection.

Products that need injection molding are an illustration of a situation in which inspection would be encouraged during manufacturing. Injection molding is a common process for creating plastic goods like signs and displays. These goods frequently undergo additional steps after manufacturing, such as powder coating and assembly. During the molding process, a flaw may be created, such as "short shooting" a mold cavity. However, if inspection isn't done now, it could be too late to fix the problem and stop it from happening again. If the injection procedure is carried out at a different plant, this is very likely. A buyer can see problems as they arise during manufacture by inspecting the goods during production.

Product Inspection Type 3: Final

The sort of product inspection that is used the most frequently is final inspection. When an order is at least 80% finished, final inspections are often conducted. At this stage of production, inspection often takes place just before the products are placed into shipping containers and when they are completely finished. Inspection enables any flaws to be detected and, if necessary, rectified during or soon after the final phases of manufacturing. Additionally, this enables the buyer to know the most current order status and reasonable expectations for the caliber of the job. Because of this, purchasers frequently do final inspection in addition to other forms of inspection. A last check of the finished items is always recommended, at the very least.