 |
What is the Defect Sorting Inspection Service or 100% Inspection?
A piece by piece inspection is a service provided by JCI which entails checking each and every item to evaluate a range of variables. Those variables can may be general appearance, workmanship, function, safety etc., or may be specified by the customer, using their own desired specification checks. The piece by piece inspection, can be carried out as a pre or post packaging inspection. In the case where goods require particular attention to detail, notably if goods are products with high value, JCI is able to perform 100% inspection service. Upon completion, all products which pass inspection are then sealed to ensure that every piece included in the shipment meets your specified quality requirements.
A piece by piece inspection can be done at any point during the manufacturing process to confirm defect-free shipments. In most cases however, quality control inspections are usually completed after production is finished and before shipping. JCI can offer a high level of service and assurance, due to our many years of technical and practical experience in quality control inspections.
The Defect Sorting Inspection Service (DSS), also calls Full Inspection or 100% inspection in sometimes, can be conducted pre or post packaging inspection, The purpose of the inspection is to sort out as many defective products as possible that have known issues (ex: specific cosmetic defects, function problems, or packing imperfections, etc.) during the number of man-days allocated. Other checks will not be done during this inspection.
In most cases, this inspection service is completed after the production completely and before packaging or post packaging. The service ensures each piece of the finished product meets specified quality requirements from the customer.
If the goods are expensive or significant, you cannot afford any risk of defects. You can use our sorting inspection, make sure all shipping goods were perfect. You don’t need to worry about any quality risk. After a FAILED inspection instead of sending back the inspector to make a simple Re-inspection, you can send the inspector back to focus on a few points and on opening all cartons or as many cartons as possible (within the allocated number of man-days) in order to sort out as many defective items as possible. Because it is the only way to verify if the factory has correctly reworked the products, it is important to sort out the previously spotted defective items accurately. JCI Service team will work with your vendor in order to ensure a non-defective shipment. The Sorting Inspection puts one engineer and several operators on-site to perform the inspection, to ensure each piece can meet the client’s requirement.
Highlights Of 100% Inspection Service Needed:
The product lot size is small
Value of products is high
You want to make sure every piece of your product is just perfect.
The cost of a full inspection is under control.
Get contract with a third party inspection company
The 100% Full inspection similar to Defect Sorting Inspection, it will inspect a whole lot of products ordered by the buyer to the supplier.
Normally all the goods should be done a 100% inspection before packing it into cartons, but sometimes your supplier had already done a 100% inspection of mass production before packing by themselves, Why should buyers book a 100% inspection again?
Well, sometimes the 100% inspection made by supplier just inefficient and can’t be trusted, every time they told you all goods been well-inspected by their internal QC and they have a strong confidence with the quality of shipment, but we are sure you know the benefits and drawbacks of quality inspection with 100% inspection.
Hot Tags: Full Inspection, Full Inspection for TEXTILES and GARMENTS, FullInspection for FOOTWEAR, Full Inspection for FABRIC, Full Inspection for BAGS and ACCESSORIES, Full Inspection for TOYS, Full Inspection for FURNITURE, Full Inspection for KITCHENWARE, Full Inspection for HOMEWARE, Full Inspection for BUILDING MATERIALS, Full Inspection for AUTOMOTIVE PARTS, Full Inspection for HOUSEHOLD APPLIANCES, Full Inspection for CONSUMER ELECTRONICS, standard inspection services, first article inspection, Full Inspection for LIGHTING
What is the Defect Sorting Inspection Service or 100% Inspection?
A piece by piece inspection is a service provided by JCI which entails checking each and every item to evaluate a range of variables. Those variables can may be general appearance, workmanship, function, safety etc., or may be specified by the customer, using their own desired specification checks. The piece by piece inspection, can be carried out as a pre or post packaging inspection. In the case where goods require particular attention to detail, notably if goods are products with high value, JCI is able to perform 100% inspection service. Upon completion, all products which pass inspection are then sealed to ensure that every piece included in the shipment meets your specified quality requirements.
A piece by piece inspection can be done at any point during the manufacturing process to confirm defect-free shipments. In most cases however, quality control inspections are usually completed after production is finished and before shipping. JCI can offer a high level of service and assurance, due to our many years of technical and practical experience in quality control inspections.
The Defect Sorting Inspection Service (DSS), also calls Full Inspection or 100% inspection in sometimes, can be conducted pre or post packaging inspection, The purpose of the inspection is to sort out as many defective products as possible that have known issues (ex: specific cosmetic defects, function problems, or packing imperfections, etc.) during the number of man-days allocated. Other checks will not be done during this inspection.
In most cases, this inspection service is completed after the production completely and before packaging or post packaging. The service ensures each piece of the finished product meets specified quality requirements from the customer.
If the goods are expensive or significant, you cannot afford any risk of defects. You can use our sorting inspection, make sure all shipping goods were perfect. You don’t need to worry about any quality risk. After a FAILED inspection instead of sending back the inspector to make a simple Re-inspection, you can send the inspector back to focus on a few points and on opening all cartons or as many cartons as possible (within the allocated number of man-days) in order to sort out as many defective items as possible. Because it is the only way to verify if the factory has correctly reworked the products, it is important to sort out the previously spotted defective items accurately. JCI Service team will work with your vendor in order to ensure a non-defective shipment. The Sorting Inspection puts one engineer and several operators on-site to perform the inspection, to ensure each piece can meet the client’s requirement.
Highlights Of 100% Inspection Service Needed:
The product lot size is small
Value of products is high
You want to make sure every piece of your product is just perfect.
The cost of a full inspection is under control.
Get contract with a third party inspection company
The 100% Full inspection similar to Defect Sorting Inspection, it will inspect a whole lot of products ordered by the buyer to the supplier.
Normally all the goods should be done a 100% inspection before packing it into cartons, but sometimes your supplier had already done a 100% inspection of mass production before packing by themselves, Why should buyers book a 100% inspection again?
Well, sometimes the 100% inspection made by supplier just inefficient and can’t be trusted, every time they told you all goods been well-inspected by their internal QC and they have a strong confidence with the quality of shipment, but we are sure you know the benefits and drawbacks of quality inspection with 100% inspection.
Hot Tags: Full Inspection, Full Inspection for TEXTILES and GARMENTS, FullInspection for FOOTWEAR, Full Inspection for FABRIC, Full Inspection for BAGS and ACCESSORIES, Full Inspection for TOYS, Full Inspection for FURNITURE, Full Inspection for KITCHENWARE, Full Inspection for HOMEWARE, Full Inspection for BUILDING MATERIALS, Full Inspection for AUTOMOTIVE PARTS, Full Inspection for HOUSEHOLD APPLIANCES, Full Inspection for CONSUMER ELECTRONICS, standard inspection services, first article inspection, Full Inspection for LIGHTING